46 Kinetics, Equilibrium, and Stability (M17Q7)

Learning Objectives

  • Distinguish between thermodynamic stability and kinetic stability, and describe the effect of each on whether a reaction is useful in generating products.

| Key Concepts and Summary | End of Section Exercises |

A chemical reaction has both kinetic and thermodynamic aspects. The quantity related to kinetics is the rate constant k, which is associated with the activation energy required for the reaction to proceed. Hence, kinetics is related to the reactivity of the reactants. The thermodynamic quantity is the energy difference resulting from the free energy given off during a chemical reaction—the stability of the products relative to the reactants. Although kinetics describes the rates of reactions and how fast equilibrium is reached, it gives no information about conditions once the reaction equilibrates. In the same measure, thermodynamics only gives information regarding the equilibrium conditions of products after the reaction takes place, but does not explain the rate of reaction.

When discussing the concept of stability, it is necessary to distinguish between thermodynamic and kinetic stability.

A reaction is shown with a graph below. The reaction has reactants “A” with equilibrium arrows to products “B”. Above the equilibrium arrows is “Stability, K”. The graph is shown with the label, “Reaction coordinate,” on the x-axis and the label, “Free Energy,” on the y-axis. Approximately half-way up the y-axis, a short portion of a red concave down curve which has a horizontal line extended from it across the graph. There is a horizontal black dashed line connecting the start of the red curve to the y-axis. The left end of this line is labeled “reactants A” The red concave down curve extends upward to reach a maximum near the height of the y-axis. There is a horizontal black dashed line connecting the maxiumum of this curve to the y-axis. A double-sided arrow connects these two black dashed lines and is labeled “activation energy (E subscript A) kinetics. From the peak, the curve continues downward to a second horizontally flattened region well below the origin of the curve near the x-axis. This flattened region is labeled “products B.” A third horizontal black dashed line connects the end of the red curve to the y-axis. A second double sided arrow is drawn between the two horizontal black dashed lines representing the start and end of the curve and is labeled, “free energy change (delta G) thermodynamics.”
Figure 1. Reaction energy diagram showing kinetic and thermodynamic relationships.

Consider Figure 1. Here the products are at lower energy then the reactants so that ΔG° of the forward reaction is negative. The reaction favors the products and the products are the more thermodynamically unstable species.

However, if the reaction barrier (Ea) is high, the reaction may proceed very slowly, and the reactants would be described as being inert (unreactive), i.e., kinetically stable.


As an example, consider the conversion of diamond into graphite (Figure 2).

C(s, diamond)  →  C(s, graphite)    ΔG° < 0

While diamond is the hardest known material, graphite is one of the softest. This is all due to differences in the way the atoms are bonded together. In diamond, each sp3 carbon is bonded to 4 other sp3 carbon atoms. In graphite each sp2 carbon is bonded to 3 other sp2 carbon atoms in sheets of connected benzene rings. Because the sheets can slide over one another, graphite is slippery.

The relationship between diamond and graphite is a thermodynamic and kinetic one. At normal temperatures and pressures, graphite is more stable than diamond, and the fact that diamond exists at all is due to the very large activation barrier for conversion between the two. There is no easy mechanism for this conversion and so transforming diamond into graphite, or vice versa, requires almost as much energy as destroying the entire lattice and rebuilding it. Once diamond is formed, therefore, it cannot reconvert back to graphite because the barrier is too high. So diamond is kinetically stable (due to the high activation energy barrier), but not thermodynamically stable (due to Δrxn < 0). Diamond is created deep underground under conditions of extreme pressure and temperature. Under these conditions diamond is actually the more stable of the two forms of carbon, and so over a period of millions of years carbonaceous deposits slowly crystallise into single crystal diamond gemstones.

Two pairs of images are shown. The left pair, labeled, “C, ( diamond ),” has a picture of a diamond held by a pair of plyers and a diagram of the molecular arrangement. The second pair, labeled, “C ( graphite ),” has a picture of a large, black, slightly shiny rock and a diagram of four sheets composed of many atoms arranged in large squares in a stacked arrangement with space between each.
Figure 2. The conversion of carbon from the diamond allotrope to the graphite allotrope is spontaneous at ambient pressure, but its rate is immeasurably slow at low to moderate temperatures. This process is known as graphitization, and its rate can be increased to easily measurable values at temperatures in the 1000–2000 K range. (credit “diamond” photo: modification of work by “Fancy Diamonds”/Flickr; credit “graphite” photo: modificaton of work by images-of-elements.com/carbon.php)

Key Concepts and Summary

After learning about the effect of enthalpy and entropy on the Gibbs Free Energy and the spontaneity of the reaction, we take a step back to look more holistically at both how fast a reaction proceeds and how many products it creates. The thermodynamic stability is related to the Gibbs Free Energy, dependent only on the energy difference between the reactants and the products. If the Gibbs Free Energy is negative and the reaction is product-favored, the reaction is thermodynamically unstable. If the Gibbs Free Energy is positive and the reaction is reactant-favored, the reaction is thermodynamically stable. The kinetics of the reaction can give information about how fast the reaction will occur. If the activation energy is low, the reaction is kinetically unstable. If the activation energy is high, the reaction is kinetically stable. When discussing if a reaction will occur, it is important to take into account both the kinetic and thermodynamic properties, since a reaction will only occur if both kinetics and thermodynamics are unstable.

Chemistry End of Section Exercises

  1. Methane is a highly flammable gas. Calculate the ΔG° at 298 K for the combustion of methane. How is possible for methane to exist in our atmosphere? Thermochemical data can be found in Appendix F.
  2. Combustion of gasoline is an exothermic and entropically-favorable process. How is it possible to store gasoline in a fuel tank without explosions?

Answers to Chemistry End of Section Exercises

  1. Methane combusts according to the reaction: CH4(g) + 2 O2(g) ⇌ CO2(g) + 2 H2O(g). ΔG° = -800.8 kJ/mol. Methane is a thermodynamically unstable compound, however, since the compound does exist in our atmosphere, it must be a kinetically stable compound. The reaction to combust methane is slow, unless initial energy is put into the system to overcome the activation energy of the reaction.
  2. The gas in a fuel tank does not explode while stored in a tank. Fuel is unreactive under standard conditions; it takes a spark to provide the activation energy to the reactants, beginning the process of combustion.

License

Icon for the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License

CHEM 104: Working Copy Copyright © by Chem 104 Textbook Team is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License, except where otherwise noted.

Share This Book

Feedback/Errata

Leave a Reply

Your email address will not be published. Required fields are marked *