D42.1 Electrolysis

In an electrolytic cell, supplied electrical energy causes a nonspontaneous redox reaction to occur in a process known as electrolysis. An electrolytic cell is the opposite of a voltaic cell, where a spontaneous redox reaction produces electrical energy.

For example, consider electrolysis of molten sodium chloride. A simplified diagram of the electrolytic cell used for commercial manufacture of sodium metal and chlorine gas is shown below. In the molten salt, Na+ ions move toward the cathode and Cl– ions move toward the anode (note that negative ions move through the circuit in the same overall clockwise direction as electrons). A porous screen allows movement of ions but prevents mixing of the products (Na(s) and Cl2(g)), which would react spontaneously upon contact.

This diagram shows a tank containing a light blue liquid, labeled “Molten N a C l.” A vertical dark grey divider with small, evenly distributed dark dots, labeled “Porous screen” is located at the center of the tank dividing it into two halves. Dark grey bars are positioned at the center of each of the halves of the tank. The bar on the left, which is labeled “Anode” has green bubbles originating from it. The bar on the right which is labeled “Cathode” has no bubbles originating from it. An arrow points left from the center of the tank toward the anode, which is labeled “C l superscript negative.” An arrow points right from the center of the tank toward the cathode, which is labeled “N a superscript plus.” A line extends from the tops of the anode and cathode to a rectangle centrally placed above the tank which is labeled “Current source.” An arrow extends upward above the anode to the left of the line which is labeled “e superscript negative.” A plus symbol is located to the left of the current source and a negative sign is located to its right. An arrow points downward along the line segment leading to the cathode. This arrow is labeled “e superscript negative.” Below the left side of the diagram is the label “2 C l superscript negative ( a q ) right pointing arrow C l subscript 2 ( g ) plus 2 e superscript negative.” At the right, below the diagram is the label “2 N a superscript positive ( a q ) plus 2 e superscript negative right pointing arrow 2 N a ( l ).”
Figure: NaCl electrolytic cell. Passing an electric current through NaCl(ℓ) decomposes the molten salt into sodium metal and chlorine gas. Care must be taken to keep the products separated to prevent the spontaneous re-formation of sodium chloride.

An external source of electric current forces electrons into the electrode in the cathode compartment, forcing the reduction half-reaction to occur:

Reduction (cathode):          2 × [Na+(aq) + e– ⟶ Na(s)]          E°Na+|Na = -2.714 V

(At the temperature of molten NaCl, sodium metal is a liquid, so E°Na+|Na(s) = -2.714 V is an approximation. E°Na+|Na(ℓ) for liquid sodium is not available in the appendix.)

In the anode compartment, the oxidation half-reaction occurs:

Oxidation (anode):          2 Cl–(aq) ⟶ Cl2(g) + 2e–          E°Cl2|Cl– = +1.358 V

The electrons formed here are conducted through a wire to the the positive terminal of the voltage source, completing the electric circuit.

We can calculate E°cell for this electrolysis cell using the same method we used for voltaic cells:

E°cell = E°right half-cell − E°left half-cell = E°cathode − E°anode = -2.714 V – (+1.358 V) = -4.072 V

The overall reaction is:

Overall:          2 Na+(aq) + 2 Cl–(aq) ⟶ 2 Na(s) + Cl2(g)          E°cell = -4.072 V

The negative E°cell indicates that this reaction is strongly reactant-favored, and under standard-state conditions, the power supply must provide at least 4.1 V to cause the electrolysis reaction to occur. In practice, the applied voltages are higher due to inefficiencies in the process itself and also to help increase the rate of the reaction.

With the transition from fossil fuels to renewable energy supplies, an important application of electrolysis is the “splitting” of water into hydrogen gas and oxygen gas. Electric energy from solar panels or wind turbines can be used to synthesize H2(g) for use as a fuel. For electric current to pass through the solution efficiently, there must be ions present. Hence, acid is typically added to the reaction solution to increase the concentrations of ions in solution.

This figure shows an apparatus used for electrolysis. A central chamber with an open top has a vertical column extending below that is nearly full of a clear, colorless liquid, which is labeled “H subscript 2 O plus H subscript 2 S O subscript 4.” A horizontal tube in the apparatus connects the central region to vertical columns to the left and right, each of which has a valve or stopcock at the top and a stoppered bottom. On the left, the stopper at the bottom has a small brown square connected just above it in the liquid. The square is labeled “Anode plus.” A black wire extends from the stopper at the left to a rectangle which is labeled “Voltage source” on to the stopper at the right. The left side of the rectangle is labeled with a plus symbol and the right side is labeled with a negative sign. The stopper on the right also has a brown square connected to it which is in the liquid in the apparatus. This square is labeled “Cathode negative.” The level of the solution on the left arm or tube of the apparatus is significantly higher than the level of the right arm. Bubbles are present near the surface of the liquid on each side of the apparatus, with the bubbles labeled as “O subscript 2 ( g )” on the left and “H subscript 2 ( g )” on the right.
Figure: Water splitting. Water decomposes into oxygen gas and hydrogen gas during electrolysis. Sulfuric acid is added to increase the concentration of H+ ions and the total number of ions in solution, but does not take part in the reaction. The volume of hydrogen gas collected is twice the volume of oxygen gas collected, because the reaction produces 2 moles of H2 per 1 mole of O2.

In a 1-M acidic solution:

Oxidation (anode): 2 H2O(ℓ) ⟶ O2(g) + 4 H+(aq) + 4 e– E°anode = +1.229 V
Reduction (cathode): 2 × [2 H+(aq) + 2 e– ⟶ H2(g)] E°cathode = 0 V
Overall: 2 H2O(ℓ) ⟶ O2(g) + 2 H2(g) E°cell = -1.229 V

At least 1.229 V is required to make this reactant-favored process occur in a 1-M acidic solution.

As a last example, let’s consider what occurs during the electrolysis of 1-M aqueous potassium iodide solution at 25 °C. Present in the solution are H2O(ℓ), K+(aq), and I–(aq). This example differs from the previous two examples because more than one species can be oxidized and more than one species can be reduced.

Considering the anode first, the possible oxidation reactions are (oxidation of K+ to K2+ is not considered because K+ has a noble-gas electron configuration and a very high ionization energy, making it very difficult to oxidize):

(i) 2 I–(aq) ⟶ I2(s) + 2 e– E°anode = +0.535 V
(ii) 2 H2O(ℓ) ⟶ O2(g) + 4 H+(aq) + 4 e– E°anode = +1.229 V

(Note that although I2 is generated in aqueous solution, we approximate the E° here by using the value for I2(s).)

The pH of a 1-M KI solution is 7, so [H+] is far from standard-state conditions. Assuming that O2 is produced at 1 bar, applying the Nernst equation to half-reaction (ii) gives:

\begin{array}{rcl} E &=& {E^ \circ } - \dfrac{RT}{nF}\ln \left( \dfrac{1}{[\text{O}_2][\text{H}^+]^4}\right)\\[1.5em] &=& 1.229\text{ V} - \dfrac{\left(8.314 \frac{\text{J}}{\text{K}\cdot\text{mol}}\right) (298.15\;\text{K})}{4\left(96485\frac{\text{J}}{\text{V}\cdot\text{mol}}\right)} \ln \left(\dfrac{1}{(1)(1 \times 10^{-7})^4}\right)\\[1.5em] &=& 1.229\;{\text{ V}} - 0.414\;\text{V}\; =\; 0.815\;\text{V} \end{array}

(Note that the reaction given in the standard half-cell potential table is the reduction reaction “O2(g) + 4H+(aq) + 4e– ⟶ 2H2O(l)  E° = +1.229 V”, hence reaction quotient Q is expressed in accordance to the given reaction.)

Because E°cell = E°cathode – E°anode, a more positive anode half-cell potential would lead to a more negative overall cell potential. The Nernst equation shows that Eanode = +0.815 V for reaction (ii) at pH = 7, which is higher (more positive) than E°anode for reaction (i). Therefore, iodide is the species being oxidized at the anode and I2 forms as a product.

Now consider the possible reactions at the cathode (reduction of I– is not considered because I– has a noble-gas electron configuration and it is not energetically favorable to add more electrons):

(iii) 2 H2O(ℓ) + 2e– ⟶ H2(g) + 2 OH–(aq) E°cathode = -0.8277 V
(iv) K+(aq) + e– ⟶ K(s) E°cathode = -2.925 V

For half-reaction (iii), we again need to apply the Nernst equation to calculate Ecathode at pH = 7, assuming H2 is produced at 1 bar:

\begin{array}{rcl} E &=& {E^ \circ } - \dfrac{RT}{nF}\ln \left( \dfrac{[\text{H}_2][\text{OH}^-]^2}{1}\right)\\[1.5em] &=& -0.8277\text{ V} - \dfrac{\left(8.314 \frac{\text{J}}{\text{K}\cdot\text{mol}}\right) (298.15\;\text{K})}{2\left(96485\frac{\text{J}}{\text{V}\cdot\text{mol}}\right)} \ln \left(\dfrac{(1)(1 \times 10^{-7})^2}{1}\right)\\[1.5em] &=& -0.8277\;{\text{ V}} - (-0.4141\;\text{V})\; =\; -0.4136\;\text{V} \end{array}

Hence, reduction of water, with Ecathode = -0.4136 V at pH = 7, is much more likely to occur than reduction of K+(aq) with E°cathode = -2.925 V. This conclusion is supported by the fact that potassium metal would react vigorously with water to form K+(aq), H2(g), and OH–(aq), so if K(s) were to form, it would immediately react with water.

Therefore, the overall reaction occurring in this electrolytic cell is:

Oxidation (anode): 2 I–(aq) ⟶ I2(s) + 2e– E°anode = +0.535 V
Reduction (cathode): 2 H2O(ℓ) + 2 e– ⟶ H2(g) + 2 OH–(aq) Ecathode = -0.4136 V
Overall: 2 H2O(ℓ) + 2 I–(aq) ⟶ H2(g) + I2(s) + 2 OH–(aq) Ecell = -0.949 V
Comments
Please use this form to report any inconsistencies, errors, or other things you would like to change about this page. We appreciate your comments. 🙂

License

Icon for the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License

Chem 109 Fall 2022 Copyright © by Jia Zhou and John Moore is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License, except where otherwise noted.