D3.1 Atomic Orbitals and Quantum Numbers

Quantum Numbers: n, ℓ, m

The atomic wave functions can be defined using three quantum numbers: n, ℓ, and m. Each wave function corresponds to an atomic orbital. Each atomic orbital defines a region in the atom within which electron probability density is large.

The energy of a hydrogen atom orbital depends on the principal quantum number, n:

 E_n = - \dfrac{2.179 \times 10^{-18} J}{n^2}, \;\;\; n = 1,2,3, \dots

As discussed earlier, the size of the orbital (the average distance of the electron from the nucleus) increases as n increases. The farther the electron is from the nucleus, the higher (less negative) the energy is.

The second quantum number, , is the orbital quantum number (sometimes called azimuth or angular-momentum quantum number). It determines the shape of the electron-density distribution. ℓ is an integer with values ranging from 0 to n – 1; that is, ℓ = 0, 1, 2, …, n – 1. Thus, an orbital with n = 1 can have only one value of ℓ, ℓ = 0, whereas n = 2 permits ℓ = 0 and ℓ = 1, and so on.

Values of ℓ are designated using letters:

ℓ = 0 s orbitals
ℓ = 1 p orbitals
ℓ = 2 d orbitals
ℓ = 3 f orbitals
ℓ = 4 g orbitals
ℓ = 5 h orbitals
Activity: Shapes of Hydrogen-Atom Orbitals

In your class notebook write a description of the shape of the electron density distribution for each orbital shown in videos below. Also, make a rough drawing of the corresponding boundary-surface diagram for each dot-density diagram.

1s orbital

2p orbital

3d orbital

Draw and write in your notebook, then left-click here for an explanation.

The 1s orbital has most of the dots close to the nucleus. As it rotates the dots are spherically symmetric.

The 2p orbital has two regions of dots, one red and one blue, oriented along one of the coordinate axes on opposite sides of the nucleus. It is not spherically symmetric. On average the dots representing electron density are farther from the nucleus than for the 1s orbital.

The 3d orbital has four regions of dots, two red and two blue. The regions of dots alternate red-blue-red-blue. The dots are oriented in the plane of two of the coordinate axes. On average the dots representing electron density are farther from the nucleus than for the 2p orbital.

The magnetic quantum number, m, specifies the spatial orientation of a particular orbital. Values of m can be any integer from – to . For example, for an s orbital, = 0, and the only value of m is 0; thus there is only a single s orbital. For p orbitals, = 1, and m can be equal to –1, 0, or +1; thus there are three different p orbitals, which are commonly shown as px, py, and pz, oriented along the x, y, and z axes.

The total number of possible orbitals with the same value of is 2 + 1. There are five d orbitals, seven f orbitals, and so forth. The sizes and shapes of s, p, and d orbitals in the first three shells are shown in the figure below. Each of these orbitals corresponds to a different set of n, , and m values.

Figure: Sizes and Shapes of Electron-density Distributions. Orbitals in the first three shells of the hydrogen atom are shown. Summing electron density over all orbitals in a shell results in the spherical electron density distributions shown in Figure: Electron Shells.
Exercise: Electron-Density Distance from Nucleus

All orbitals with the same value of n and ℓ form a subshell. For example, the 2px, 2py, and 2pz orbitals constitute the 2p subshell because each of these orbitals has n = 2 and ℓ = 1. The number of orbitals in a subshell equals the number of different values for the m quantum number. Each shell contains n subshells: for example, when n = 3, there is a 3s, a 3p, and a 3d subshell, corresponding to the three possible values of 0, 1 and 2.

Orbital Phases and Nodes

The figure above (Figure: Sizes and Shapes of Electron-density Distributions) shows some atomic orbitals as either all blue or all red (for example, 1s and 2s), while other orbitals contain both colors (for example, the 2p orbitals). The blue and red colors denote the mathematical sign of the wave function, a property called the phase of the wave function. Most wave functions are positive in some regions and negative in others. Phase is important when wave functions on two atoms interact to form a chemical bond.

The relationship between wave function and electron density is depicted more explicitly in the figure below. In the middle row, boundary-surface diagrams show the sizes and shapes of electron-density distributions for the 1s, 2s, and one of the 2p orbitals. In the top row are the corresponding wave functions (ψ); the bottom row shows electron density, ψ2.

Figure: Wave Functions and Electron Density. The boundary-surface diagrams from the figure above showing 1s, 2s, and 2p orbitals are reproduced in the middle. The corresponding wave function is shown on top and electron density shown on the bottom. Each wave function is colored similar to the boundary-surface diagram to highlight its phases.

The wave functions and electron-density functions are color coded to show the regions where ψ > 0 as blue and the areas where ψ < 0 as red. A surface where the wave function changes sign is called a node. At a node, ψ = 0 and therefore the probability of finding the electron in that surface is also 0.

For the 1s orbital, there are no nodes; its wave function only has positive values. For the 2s orbital, there is one node at r = 1.05 Å; the wave function goes from positive values near the nucleus to negative values farther out. (You cannot see this node in the boundary-surface diagram, because the node is a sphere that is within the volume enclosed by the boundary surface.) A node that occurs at a specific value of r is a radial node, and therefore radial nodes have a spherical shape. The 3s orbital, for example, has two radial nodes enclosed within the boundary-surface diagram.

Each 2p orbital has one node. Look at the boundary-surface diagram to verify that this node is planar instead of spherical. Non-spherical nodes are angular nodes. For example, the 2px orbital has one angular node: the yz plane; ψ is equal to 0 at all points in the yz plane rather than at any specific r value. You can see the presence of angular nodes clearly in boundary-surface diagrams.

An orbital has n – 1 nodes, of these, n – 1 – ℓ are radial nodes, and the number of angular nodes corresponds to the value of ℓ. A generalization that is true for all kinds of waves is that the greater the total number of nodes, the higher the energy. The phase of the wave function differs on either side of a node because the wave function changes from one mathematical sign to the other as it crosses a node. Visually, we represent these different phases, and the presence of nodes, with different colors in the boundary-surface diagram.

Activity: Radial and Angular Nodes

Fourth Quantum Number, ms

The fourth quantum number, called the spin quantum number, ms, differs from the other three quantum numbers in that it describes the electron rather than the orbital. An electron has a very small magnetic field. Moving a macroscopic charge in a circular path produces a magnetic field, so initially the electron’s magnetic field was attributed to it spinning like a top; hence the name “spin quantum number”. The electron’s magnetic field can have two quantized states: either “up” or “down”. This gives two possible ms values, ms = +½ or ms = -½. When an electron occupies an orbital, we typically depict these two possible ms values as an ↑ or ↓ arrow.

Exercise: Quantum Numbers
Activity: Summary of Quantum Numbers

In your class notebook make a table summarizing the names, symbols, allowed values, and important properties of the four quantum numbers. (You can use this table for studying later.) If you are studying with someone else, make your tables independently and then compare.

When you are satisfied with your table, compare it with ours.

Comments
Please use this form to report any inconsistencies, errors, or other things you would like to change about this page. We appreciate your comments. 🙂 (Note that we cannot answer questions via the google form. If you have a question, please post it on Piazza.)

License

Icon for the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License

Chem 109 Fall 2023 Copyright © by Jia Zhou; John Moore; and Etienne Garand is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License, except where otherwise noted.